Electronic Precision Plastic Injection Mold

Mold injection molding is a processing method used in mass production of some complex-shaped parts. The specific principle refers to: the plastic raw materials melted by heat are pushed by the screw of the injection molding machine into the cavity of the plastic mold under high pressure, and after cooling and solidification, the plastic molded product is obtained.

This product is a precision plastic shell injection mold for the Medical Device Industry. It has high requirements on the precision of plastic parts, high requirements on the assembly degree of the mold, and the surface needs to be smooth without scratches.

This product is a precision plastic mass production small parts injection mold for the Automotive Industry. It has high requirements on the precision of plastic parts, high requirements on the assembly degree of the mold, and the surface needs to be smooth without scratches.

This product is a precision plastic injection mold for the Small Home Appliance Industry. It has high requirements on the precision of plastic parts, high requirements on the assembly degree of the mold, and the surface needs to be smooth without scratches.

It is one of matt black function components and as a matt black anodizing base plates used on the welding machine. Perpendicularity is up to 0.1 mm on both A and B datum. Moreover, located all holes for black anodized aluminum parts within ±0.1mm and very highly strict to the flatness of surface without any defects.

This product is a precision plastic mass production small parts injection mold for the Automotive Industry. It has high requirements on the precision of plastic parts, high requirements on the assembly degree of the mold, and the surface needs to be smooth without scratches.

It is one of Special Aluminum Electroplated Parts and as a cut off Block used on the measuring machine. Flat is up to 0.01 mm on the surface. Moreover, keep sharp edges for Cut off and very highly strict to the surface without any defects.

As stainless steel components for assembly pulley used on the measuring machine With High Straightness Requirements. It required a strict roundness for twirling. Meanwhile, this part is processed in one go and precise in the location required to be machined within the strict tolerance.

This micro porous semiconductor component was made of AISI 420. There are total 264 holes with diameter 1mm and R0.1 lead-in; and total 49 holes with diameter 0.6mm and R0.2 lead-in. Its porous nature makes it a very critical component in pneumatic devices.